Product Specs
The AP8HSH.DSSF.SH Series 50-150 HP is a heavy-duty submersible solids handling pump designed for demanding wastewater and solids handling applications. Featuring an 8" discharge and the ability to pass spherical solids up to 3" in diameter, it is built to move high volumes of liquid containing suspended solids. Its rugged construction and premium-duty components provide dependable operation in continuous service environments.
Horsepower: 50-150HP
Speed: 1750 RPM
Discharge: 8"
Spherical SolidsHandling: 3"
Built with durable cast iron construction and a dynamicallybalanced enclosed dual-vane impeller, this pump is engineered for reliablesolids handling performance. A premium-efficiency, oil-filled NEMA three-phasemotor works with oil-lubricated bearings and a tandem double mechanical sealoperating in an oil-filled reservoir to provide dependable continuous-dutyoperation.
Additional features include a stainless steel shaft andhardware, epoxy coating, heavy-duty cord entry, moisture detection, andtemperature monitoring. Together, these components deliver long-lastingperformance while helping protect the pump in demanding pumping applications.
Discharge: 8",125 lb, horizontal flange, slotted to accommodate 150 mm ISO flange.
Liquid Temperature: 104°F(40°C) continuous
Volute: Cast ironASTM A-48 class 30
Motor Housing: Castiron ASTM A-48 class 30
Seal Plate: Castiron ASTM A-48 class 30
Impeller: Design:Enclosed dual vane with pump-out vanes on back side. Dynamically balanced.Material: Ductile iron ASTM A-536, 65-45-12.
Shaft: 416 seriesstainless steel
Hardware: 300series stainless steel
O-Rings: Buna-N
Lifting Bail: 300series stainless steel
Maximum Submergence: 66ft (20 m)
Paint: Epoxy
Double MechanicalSeal: Design: Tandem mechanical in oil-filled reservoir. Inboard rotatingfaces: carbon; stationary faces: ceramic. Outboard rotating and stationaryfaces: silicon carbide. Buna-N elastomer and 300 series stainless steelhardware.
Cord Entry: 40 ftcord, epoxy sealed housing with secondary pressure grommet for sealing andstrain relief.
Bearings: Upper:Ball, single row, oil lubricated, radial load. Lower: Ball, double row, oillubricated, radial and thrust loads.
Motor: NEMA threephase 208/230 & 460 V, premium efficiency, oil-filled, squirrel cageinduction, inverter duty rated, Class H insulation. Requires overloadprotection in control panel.
Moisture Sensor: Normallyopen (N/O), requires relay and panel.
Temperature Sensor: Normallyclosed (N/C), wired in series with control circuit.
Warranty: 1 Year
